BSN   |   MASTAN   |   Koleksi Perpustakaan
Pengguna Baru?  |   Register   |   Login   |   Bantuan   
Indonesia | English
SNI Detail SNI Number : SNI 03-6416.2-2000   

Title :
Specification for joint materials of concrete dams - Part 2: Installation of waterstop for joints

Abstract :
The standard describes the specification of joint materials in construction dam. It covers the information on types of joint, preparation and construction of water stops from PVC and Rubber, metal, bitumen mix, and types of surface water stops and practical tesnting of water stops. The specification is used to help technicians building the construction, the use of materials, and to determine the form ofjoint water stops.

ICS :
  1. 93.160 Hydraulic construction

SK Penetapan : 3775/BSN-I/HK.64/12/2000


Normative SNI :
 1. SNI 03-4142-1996.  Metode pengujian jumlah bahan dalam agregate yang lolos saringan nomor 200 (0,0075 mm)
 2. SNI 06-2456-1991 .  Bahan aspal, Metode pengujian penetrasi
 3. SNI 15-2531-1991 .  Semen portland, Metode pengujian berat jenis
 4. SNI 03-4142-1996.  Metode pengujian jumlah bahan dalam agregate yang lolos saringan nomor 200 (0,0075 mm)
 5. SNI 03-6820-2002.  Spesifikasi agregat halus untuk pekerjaan adukan dan plesteran dengan bahan dasar semen
 6. SNI 03-6825-2002.  Metode pengujian kekuatan tekan mortar semen portland untuk pekerjaan sipil
 7. SNI 03-6826-2002.  Metode pengujian konsistensi normal semen portland dengan alat vicat untuk pekerjaan sipil
 8. SNI 03-6827-2002.  Metode pengujian waktu ikat awal semen portland dengan menggunakan alat vicat untuk pekerjaan sipil
 9. SNI 15-2530-1991 .  Semen portland, Metode pengujian kehalusan

Normative non SNI :
 1. .  ASTM Standards B 152, Copper sheet, strip, plate and rolled bar specification
 2. .  ASTM Standards D 638-82, Test for tensile Properties of Plastics
 3. .  ASTM Standards D 746-79, Standard test method for brittleness temperature of plastics and elastomers by impact
 4. .  ASTM Standards D 747-70, Test for stiffness of plastics by means of a cantilever beam
 5. .  ASTM Standards D 1203-67 (1981), Volatile loss from plastics using activated carbon method
 6. .  ASTM Standards D 412:68, Rubber properties in tension
 7. .  ASTM Standards D 2240, Rubber property - Durometer hardness
 8. .  ASTM Standards D 753, General purpose polychlorophene jacket for wire and cable
 9. .  ASTM Standards D 1149-64, Accelerated Ozone cracking of vulcanized rubber
 10. .  ASTM Standards D 1190-74 (1980), Concrete joint sealer, hot-poured elastic type sealer, Specification for V
 11. .  BS 903-1971, Methods of testing vulcanized rubber - Part A 2: Determination of tensile stress-strain properties
 12. .  BS 903-1971, Methods of testing vulcanized rubber - Part A 26: Determination of hardness
 13. .  BS 903-1971, Methods of testing vulcanized rubber - Part A 39: Determination of compression set by constant deflection
 14. .  BS 903-1971, Methods of testing vulcanized rubber - Part A 19 : Accelerated ageing test
 15. .  BS 903-1971, Methods of testing vulcanized rubber - Part A 13: Determination of resistance to low temperatures
 16. .  BS 4608-1970, Copper for electrical purpose, rolled, sheet, strip and foil
 17. .  BS 2370, Specification for rolled copper and copper alloys : sheet, strip and foil
 18. .  BS 2499-1973, Hot applied joint sealants for concrete pavements
 19. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA
 20. .  CRD-C 572, Specifications for polyvinylchloride (PVC) water-stop
 21. .  CRD-C 513, Specification for rubber waterstops
 22. .  CRD-C 573 : Tensile strength test
 23. .  CRD-C 569, Hardness test : shore durometer
 24. .  CRD-C 577, Oxygen bomb method of ageing
 25. .  CRD-C 575, Water absorption. Test
 26. .  CRD-C 576, Test for compression set
 27. .  CRD-C 536, Test for ozone resistance
 28. .  SABS 404/405-1971, Phosphorous de-oxidized non-arsenical and arsenical copper
 29. .  AISI tipe 304, Stainless steel
 30. .  SS-S-164, Sealer : hot-poured type, for joints in concrete. Merritt 1966 (lihat literatur)
 31. .  DIN 53455, Tensile strength and elongation
 32. .  DIN 53476, Resistance againts chemical attacks
 33. .  DIN 16938, Bursting test along joints
 34. .  SIA 280, Mechanical perforation resistance
 35. .  SK SNI S-02-1994-03, Spesifikasi Agregat Halus Untuk Pekerjaan Adukan dan Plesteran Dengan Bahan Dasar Semen
 36. .  SK SNI M-111-1990-03, Metode Pengujian Kekuatan Tekan Mortar Semen Portland Untuk Pekerjaan Sipil
 37. .  SK SNI M-112-1990-03, Metode Pengujian Konsistensi Normal Semen Portland Dengan alat Vicat Untuk Pekerjaan Sipil
 38. .  SK SNI M-113-1990-03, Metode Pengujian Waktu Ikat Awal Semen Portland
 39. .  BS 903-1971, Methods of testing vulcanized rubber - Part A 18: Water absorption
 40. .  BS 2571-1963, Flexsible PVC compounds
 41. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA, CRD-C 572, Specifications for polyvinylchloride (PVC) water-stop
 42. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA, CRD-C 513, Specification for rubber waterstops
 43. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA, CRD-C 573 : Tensile strength test
 44. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA, CRD-C 569, Hardness test : shore durometer
 45. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA, CRD-C 577, Oxygen bomb method of ageing
 46. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA, CRD-C 575, Water absorption. Test
 47. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA, CRD-C 576, Test for compression set
 48. .  US CEWES (US Corps of Engineers, Waterways Experiment Station), USA, CRD-C 536, Test for ozone resistance
 49. .  ASTM Standards D 395, Rubber property compression set

Page Number : 17